Question 1

Why does my breaker keep tripping?

Accepted Answer

A breaker trips when a circuit draws more current than it is rated for, when there is a short circuit, or when the breaker itself is worn out. Common causes include too many devices on one circuit, a failing appliance, damaged wiring, or an overloaded panel. Resetting a breaker once is normal; repeated tripping means the underlying cause needs to be found. Elite Pro Services can inspect the circuit and panel safely.

Question 2

How do I know if my electrical panel needs to be upgraded?

Accepted Answer

Signs include breakers that trip frequently, a panel with fuses instead of breakers, a 60-amp or 100-amp service that cannot support modern loads, breakers that feel warm, flickering lights, or a home that is being renovated or having an EV charger or hot tub added. A licensed electrician can assess your panel and explain whether an upgrade is needed. Elite Pro Services handles panel upgrades across the East Valley.

Question 3

Is it safe to add an EV charger to my home?

Accepted Answer

Yes, when installed by a licensed electrician who pulls the required permit. A Level 2 charger (240V) typically needs a dedicated 50-amp circuit. The electrician will assess your panel capacity, run the circuit, install the outlet or hardwired unit, and arrange the inspection. Elite Pro Services installs EV charger circuits for homes and businesses across the East Valley.

Question 4

What causes flickering lights?

Accepted Answer

Flickering can come from a loose bulb or fixture connection, a failing dimmer switch, a loose wire at the panel or junction box, a large appliance starting up on the same circuit, or a problem with the utility connection. Occasional flicker from an appliance starting is usually harmless; persistent or whole-house flickering should be inspected. Elite Pro Services can trace the source and make the repair.

Question 5

How much does it cost to rewire a house?

Accepted Answer

Cost depends on home size, the extent of the rewire, accessibility of walls and attic, local permit fees, and whether the panel also needs upgrading. A full rewire is a significant project but may be necessary in older homes with aluminum wiring, knob-and-tube wiring, or wiring that has been damaged. Elite Pro Services can inspect your wiring and provide a written estimate.

Question 6

What is a GFCI outlet and where do I need them?

Accepted Answer

A GFCI (ground fault circuit interrupter) outlet shuts off power instantly when it detects a ground fault, protecting against shock in wet areas. Current code requires GFCI protection in bathrooms, kitchens near sinks, garages, outdoor outlets, unfinished basements, and near pools or hot tubs. Older homes often lack them. Elite Pro Services can install GFCI outlets wherever they are needed.

Question 7

Can I add outlets to my home without a permit?

Accepted Answer

Most jurisdictions require a permit for new circuits or adding outlets that require new wiring. Working without a permit can create problems when selling the home, void homeowner’s insurance coverage for electrical fires, and leave unsafe work hidden in walls. Elite Pro Services pulls the required permits for all electrical work and schedules the inspection.

Question 8

What should I do if I smell burning from an outlet or switch?

Accepted Answer

Stop using the outlet or switch immediately and turn off the circuit breaker for that area. A burning smell can indicate arcing, overheating wiring, or a failing device, all of which are fire hazards. Do not use the outlet until a licensed electrician has inspected it. Elite Pro Services is available 24/7 for electrical safety calls across the East Valley.

Commercial Electrical in the Phoenix Area

Why Choose Elite Pro Services?

Electrical Questions Answered

Request a Quote

GET YOUR QUOTE